Date: Septembre 27, 2005 Subject: Storage Procedure for 2-StrokeEngine Equipped VehiclesNo. 2005-11REVISION => 1: NOVEMB ER 3, 2005YEAR MODEL MODEL
Model(s): GTI LE / GTI RFIDisconnect the water supply hose used tocool the magneto. It features a quick connectfitting. Press both tabs [1] and pull f
PROPULSION SYSTEMJet PumpLubricant in impeller s haft reservoir shouldbe drained. Reservoir should be cleaned andrefilled with SEA-DOO synthetic 75W90
CAUTION: Fuel stabilizer should be addedprior to engine lubrication to ensure fuelsystem components protection againstvarnish deposits.WARNINGFuel is
CAUTION: Use only undiluted antifreeze (100%concentration). The pre-mixed antifreezeavailable from Bombardier RecreationalProducts Inc. is not suitabl
On vehicles equipped with 717 engine,Install a hose pincher on injection hose[1] going to tuned pipe.F17E03A1Photo shows engine water outlet hose [1],
Model(s): 787 RFI EnginesDisconnect hose [2] just above T-fitting[1] as shown.F15E02A21Install a hose pincher [1] just below T-fitting.Pour approximat
Disconnect water supply hose [1].Pinch water outlet hose [2].Install a temporary hose to engine fitting [3].F22E04A123Insert a funnel into the tempora
NOTE: For the above engine and exhaustsystem procedures, although antifreeze willmainly drain out, it has mixed with the waterthat was possibly trappe
Comments to this Manuals