Sea-doo 2004 3D RFI Specifications download pdf (Page 76)

MAINTENANCE



WARNING

Only perform procedures as de-

tailed in this guide. It is recom-

mended that the assistance of an

authorized Sea-Doo dealer be peri-

odically obtained on other compo-

nents/systems not covered in this

guide. Unless otherwise speci-

fied, engine must not be running

and the safety lanyard must be re-

moved from its post for all main-

tenance procedures. Components

inside engine compartment may

be hot. Never use jet pump com-

ponents or steering pole to lift the

watercraft.

Lubrication

Seal Carrier

Use Sea-Doo synthetic grease or

equivalent.

Remove rear access cover to gain ac-

cess to seal carrier.

F22L0JY

1

1. Rear access cover

Using a grease gun, carefully lubricate

seal carrier of mid bearing until grease

is just coming out of the seal.

F22J05Y

1

1. Grease seal carrier of mid bearing

Reinstall properly all removed parts.

Anticorrosion Protection

Throttle Cable

Lubricate the throttle cable with BOM-

BARDIER LUBE or an equivalent lubri-

cant.

Electrical Connections

As necessary, apply anticorrosion

product such as dielectric grease on

battery posts and all exposed cable

connectors.

CAUTION: Never lubricate connec-

tors of the MPEM (Multi-Purpose

Electronic Module).

Additional Lubrication

BOMBARDIER LUBE or an equivalent

lubricant will help prevent corrosion

of metallic parts and maintain proper

operation of mechanisms and mov

ing

parts.



WARNING

Never lubricate the safety lanyard

post.

Throttle Body and Oil Injection

Pump

Lubricate springs, shafts and exposed

portion of cables.

_____________________

77

www.SeaDooManuals.net

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 117 118

Comments to this Manuals

No comments