Sea-doo 2004 3D RFI Specifications download pdf (Page 80)

Fuses

If an electrical problem occurs, check

the fuses. If a fuse is burnt, replace by

one of the same rating. Follow proce-

dures below.

A15E0KZ

1. Fuse

2. Check if melted

3. Ampere rating



WARNING

Never use a higher rated fuse

as this can cause severe dam-

age. If a fuse has burnt out, the

source of the malfunction must

be determined and corrected be-

fore restarting. See an authorized

Sea-Doo dealer for servicing.

Fuses can be found on the MPEM and

beside the VCM (Vehicle Control Mod-

ule).

To access fuses, remove engine cover

and lock the steering pole with the

holder in the upright position.



WARNING

Always install steering pole holder

immediately after engine cover re-

moval to support the pole securely

while working in the engine com-

partment.

MPEM

Locate the MPEM in front of engine.

F22H03Y

1. Engine

2. MPEM

Fuse ratings are identified on the

MPEM. Look for them beside the

fuse holder. SPR means spare (fuse).

F17H05Y

1. 15 A (battery)

2. 5 A (MPEM)

3. 10 A (fuel pump)

Remove fuse cover from MPEM.

Use the tabs of the fuse cover to re-

move and reinstall fuses.

_____________________

www.SeaDooManuals.net

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 117 118

Comments to this Manuals

No comments

Sea-doo 2004 3D RFI Specifications Page 80

Comments to this Manuals

Related products and manuals for Engine Sea-doo 2004 3D RFI