Sea-doo 2004 3D RFI Specifications download pdf (Page 93)

Engine Will Not Start

OTHER OBSERVATION POSSIBLE CAUSE REMEDY

Safety lanyard removed.

Install cap over post.

Burnt fuse on MPEM: battery,

or main fuse.

Check wiring then replace

fuse(s).

Discharged battery.

RefertoanauthorizedSea-Doo

dealer.

Battery connections, corroded

or loose.

RefertoanauthorizedSea-Doo

dealer.

Water-flooded engine.

Refer to WATER-FLOODED

ENGINE in SPECIAL

PROCEDURES.

Faulty sensor or MPEM.

Seized engine.

RefertoanauthorizedSea-Doo

dealer.

Engine does not turn over.

Seized jet pump. Try to clean. Otherwise, refer

to an authorized Sea-Doo

dealer.

Loose battery cable

connections.

Check/clean/tighten.

Discharged or weak battery.

Engine turns slowly.

Worn starter.

RefertoanauthorizedSea-Doo

dealer.

Fuel tank empty or

water-contaminated.

Refill. Siphon and fill with fresh

fuel.

Fuel filter clogged.

Clean, check fuel tank for

water.

Fouled/defective spark plugs. Replace.

Fuel-flooded engine.

Refer to FUEL-FLOODED

ENGINE in SPECIAL

PROCEDURES.

Faulty component in the fuel

injection system.

RefertoanauthorizedSea-Doo

dealer.

Burnt fuel pump fuse.

Check wiring then replace fuse.

Engine turns normally.

Electrical problem.

RefertoanauthorizedSea-Doo

dealer.

Engine Misfires, Misinjects, Runs Irregularly

OTHER OBSERVATION POSSIBLE CAUSE REMEDY

Fouled/defective/worn spark

plugs.

Replace.

Faulty MPEM.

RefertoanauthorizedSea-Doo

dealer.

Weak spark.

Too much oil supplied to engine. Improper oil pump adjustment,

refer to an authorized Sea-Doo

dealer.

______________________

www.SeaDooManuals.net

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 117 118

Comments to this Manuals

No comments

Sea-doo 2004 3D RFI Specifications Page 93

Comments to this Manuals

Related products and manuals for Engine Sea-doo 2004 3D RFI